Datsun 240z 260z 280z Wiper Motor Upgrade Installation Sheet
Thank you for your business! Please read this first to ensure proper installation of your new wiper motor.
Make sure the colors on the wires match, clean your old wires. Please look at wiring diagrams to confirm your engine bay wire harness connector wire colors.
Included is the mating connector for your harness if you want to replace the terminal on your engine bay harness.
Before you install the motor to the bracket, you will need to drill 3 new holes and notch your mounting bracket for the motor to bolt to the bracket. Enclosed is a template. The bottom of template should contact the mounting bracket. This is important so you don’t drill the holes backwards ( mirror image). I would paint bracket. After bracket has dried, wrap motor with rubber cover and install motor on bracket.
AFTER YOU HAVE INSTALLED MOTOR, DO NOT INSTALL WINDSHIELD WIPERS UNTIL YOU HAVE TURNED THE WIPER MOTOR ON SEVERAL TIMES FOR EACH SPEED AND THEN OFF. THE MOTOR SHOULD STOP AT THE SAME POINT, THE WIPERS WILL BE AT THE LOWEST POINT ON THE WINDSHIELD AT REST/ INSTALL THE WINDSHIELD WIPERS AT THE LOW POINT ON THE WINDSHIELD.
Please check out the new website for installation video and wiring diagrams for reference for 240z 260z 280z
If you have questions please call me 904-418-8693
or email me email@example.com