Datsun 240z Engine Bay Harness Rebuild Kit with Fusible Links

• Original Style M/F electrical connectors  (19)
• 4mm Tin plated Bullet Connectors with clear vinyl sheaths (45)
• Right angled bullet connectors & rubber boots (2) for temp sensor and brake proportioning valve.
• 6.3mm male spade connectors with sheaths (10)
• 6.3mm female spade connectors with sheaths (10)
• 2-1/4” (ID) 7/16” OD ring terminal  8 gauge for main ground (-) and main positive (+)
• 2- 3/16” ID 3/8”OD Ring Terminal 10/12 gauge  for Alternator
• 1/4 ” ring terminal 14-16ga  for Oil Pressure sensor
• 2- Fusible Links for Starter and Alternator
• 2- 14-16 gauge wire with connector and right angled boots for temp sensor and oil pressure
• 3 ft of 3mm black sheath
• 8 ft of 8mm black sheath
• 3 ft of 14mm Black Sheath
• 1 roll of harness loom tape
• 40 sets of 2.8mm M/F brass spade terminals
• 85 sets of 6.3mm M/F brass spade terminals
• 2 sets of 7.8mm M/F tin spade terminals ( 8ga and 10-12ga)

Extra Terminals are included